Choosing the right Flexible Furler for your boat

If your forestay is disconnected from the boat:
1) Lay the forestay out flat
2) Measure from the mast pin at the top of the forstay all the way down to the T-Bolt at the bottom of the turnbuckle*
3) Check your manual to make any deductions required for installation

*If you need to undo the turnbuckle to take the forestay off the rig we highly recommend marking the correct turnbuckle position with a sharpie for easy reinstallation.

If your forestay is connected to the boat:

1) Attach the end of your tape measure to your headsail halyard

2) Hoist the tape all the way up, until it stops on it’s own

3) Take the measurement from your tape. This will get us close to the correct forestay measurement
4) Now we must step back with the tape still hoisted, and look at the distance from the top of the tape, to the forestay pin. Take your best estimate, and add that measurement to the measurement we got from the hoisted tape measure. This is our forestay length.
5) Check your manual to make any deductions required for the installation of your furler.